OLED Microdisplay Electronics
SA Photonics’ WUXGA OLED Microdisplay Electronics are designed to accept two independent HDMI video inputs of 1920 x 1200 at 60 Hz. The electronics drive two 1920 x 1200 24-bit color eMagin WUXGA OLED microdisplays. The design consists of a three board stack: an HDMI board, an FPGA board and a dual OLED board.
The WUXGA Drive Electronics package has ESD protection and input voltage clamping on all external customer ports, HDMI cable equalization for long cable inputs, external brightness control via user buttons, external microdisplay power down control, a simple and stable COM terminal interface, high frame rate HDMI receivers, HDCP capability, general purpose input/output (I/O) port for future expansion, and single or dual video channel configurations.
The electronics package comes in two configurations: one inside a case with the proper heat sinking, and the second as a board set where the OEM integrates it into their enclosure. The cable length between driver and OLEDs can be up to 96 inches.
|Video Input||1920 x 1200 @ 60 Hz|
|Video Output||eMagin WUXGA OLED Microdisplays|
|Board Size||50 mm x 50 mm|
|Stack Height||17 mm|
|Power||Single: 3.5 W typical|
|Dual: 5 W typical / 7 W max|